Products and Specifications
Tanks for Chemicals
T11 A14 14300 Litre
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 14300 LTR | 3778 US GALLON |
| Maximum Gross Weight | 34000 KG | 74956 LBS |
| Tare | 3700 KG | 8157 LBS |
| Construction: | ||
| Working Pressure | 4.0 BAR | 58 PSI |
| Test Pressure | 6.0 BAR | 87 PSI |
| Steam Working Pressure | 4.0 BAR | 58 PSI |
| Steam Test Pressure | 6.0 BAR | 87 PSI |
| Relief Valve | 4.4 BAR | 63 PSI |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 130°C | 266°F |
| Shell Material | Stainless steel DIN 1.4404 (AISI 316L), DIN 1.44041 (AISI 316) | |
| Thickness | 5.86mm shell, 6.5mm ends, equivalent 8mm mild steel. | |
| Design Code | ASME, section VIII, division 1 | |
| Approvals | Bureau Veritas Construction Certificate, DOT UK IMO type 1, DOT US IM101, UIC, CTC, AAR, FRA, CSC, ISO, ADR, RID, BAM | |
| Standard Fittings: | ||
| Manlid | 500mm (20") diameter. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline | 38mm (1½") black ball valve, outlet 1½" BSP, s/s screw cap, located in rear compartment. | |
| Relief Valve | 80mm (3") flanged. | |
| Top Outlet | Blank flange for optional fitting of 80mm (3") s/s butterfly valve, 80mm (3") removable full length syphon tube. Outlet 80mm (3") BSTD, DIN 80, ASA 150. | |
| Vapour Return | 80mm (3") bolted flange for optional fitting of vapour return. | |
| Bottom Discharge | 80mm (3") clean flow foot valve and clamped 80mm (3") butterfly valve, outlet 3" BSP screw thread and cap. | |
| Remote Closure | Fitted to foot valve. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon. | |
| Steam Heating | 7m² (75ft) effective surface area, external steam ducts. ¾" BSP screw inlet/outlet and cap. | |
| Insulation | 50mm (2") isocyanurate (CFC free) rigid foam; white 2mm grp cladding; thermal value 37 Kcal/hr at 30°C. | |
| Temperature Gauge | -40°C to +150°C fitted rear end. | |
| Walkway | 400mm wide non-slip aluminium, access to all corners and valves. | |
Actual measurements and specifications may vary and are subject to confirmation. The authorised Dangerous Goods Advisor should confirm fitness for purpose of any tank and that the cargo is compatible and will not attack the tank vessel. Tank containers are supplied in accordance with a signed lease and Seaco General Trading conditions.